Are the products safe to use?

Epoxy resin products are classified as skin irritants. Avoid skin contact by wearing Nitrile gloves. When appropriate wear eye protection. Full details are available on the product data sheets.

How ‘green’ is DRY FLEX®?

Our system repairs only the affected area rather than the whole component so less material is used, saving on disposal, raw materials and transport.

Why are nitrile gloves recommended?

We recommend wearing protective gloves to avoid skin contact with epoxy. Nitrile gloves are ideally suited for this purpose. Latex, vinyl, painting gloves, etc., do not provide sufficient protection.

Do the empty tubes belong in residual waste or in small chemical waste?  

The cylinders/product cartridges must be scraped/empty to be disposed with normal waste. The nozzle, however, always contains a small amount of unmixed product and must therefore be cut off and disposed of with small chemical waste.

Do I need to take any special safety precautions when sanding cured epoxy?

The epoxy is fully cured at the time of sanding. This means nitrile gloves are no longer required. The same safety precautions apply as for normal wood sanding, so make sure to use a good dust extractor.