Elastic repair compound, supplied in a single cartridge, for fast timber repairs and splicing (paintable after 4 hours*).
Ideal for the permanent repair of decayed and damaged wood. Can be used with a standard skeleton gun. Can be sanded and painted on the same day.
Suitable for:
* Typical curing time for a repair 1cm thick applied at 20ºC. Temperature and humidity may affect curing times.
Watch our step-by-step instructional video to see how to apply this product easily and effectively. That way, you’ll get the most out of your repair and work on any project with confidence.
Not sure which product you need for your repair? Our useful product selector will help you get started! Answer a few simple questions and find out which product best suits your job.
* Typical curing time for a repair 1cm thick applied at 20ºC. Temperature and humidity may affect curing times.
| Shelf life | See label; storage and transportation temperature: 5 – 40°C |
|---|---|
| Content | 150ml |
| Repair thickness | 5 -20mm (at 10 – 35ºC), 5 – 50mm (at 0 – 10ºC) |
| Ready for sanding and painting | After 4 hours |
| Application temperature | 0 – 35ºC |
| Application period at 20ºC | 20 – 25 minutes |
| Pre-treat with | DRY FIX® UNI |
| Product or tool | Product |
Remove all decayed wood and pre-treat with DRY FIX® UNI.
Dispense DRY FLEX® 4 (2-in-1) on to the EASY•Q™ mixing plate.
Mix components A and B with the EASY•Q™ application knives until a homogeneous colour is reached.
Spread the mixed DRY FLEX® 4 (2-in-1) in a thin layer over the mixing plate (to extend the application period).
Apply DRY FLEX® 4 (2-in-1) and immediately remove excess product.
When cured, sand the surface lightly before applying a paint or stain.
Yes, our products are guaranteed for 10 years, subject to conditions.
Epoxy resin products are classified as skin irritants. Avoid skin contact by wearing Nitrile gloves. When appropriate wear eye protection. Full details are available on the product data sheets.
Yes, as long as the temperature of air and surface are above 0°C. At temperatures from 0°C DRY FLEX® 1, 4, BIO FLEX™ COOL AND ALLROUND can be used. The DRY FLEX® 16 is recommended to be used above 10°C. At lower temperatures please ensure that no condensation forms on the surface to be repaired.
Discover related products that perfectly match this product. These products will help you achieve the best result on your wood repair job.
Need help finding the right product?
